When insulation blocks the intake vents under your eaves, it can restrict the airflow your attic ventilation system needs.
A roof baffle helps solve the problem by keeping the insulation pushed back and creating a clear channel for air to travel from the intake vent into the attic space.
That small gap may not look like much, but it plays an important role in keeping air moving through the ventilation system.
Proper attic ventilation starts with proper airflow. Think your insulation may be blocking your vents? Let’s get that checked out.
One of the biggest differences from traditional architectural shingles is the attention to spacing and pattern.
To create that distinctive “teeth” pattern, the shingles need to be laid out with precise spacing. On this installation, that means maintaining 5½-inch and 15½-inch spacing between shingles throughout the pattern.
It may seem like a small detail, but consistent spacing is what creates the clean, intentional look Presidential Shake shingles are known for.
When choosing a contractor, make sure they understand the installation requirements of the specific roofing product being used. The right materials only look their best when they’re installed correctly.
Have questions about Presidential Shake or other roofing options? Give Integrity Roofing & Construction a call.
A roof leak doesn’t always require a complete tear-off and replacement.
For this sunroom, the homeowner was dealing with water coming down from the ridge. Our estimator explains why a flat roofing layover using TPO or PVC could be a practical long-term solution for this particular section while helping keep project costs lower.
The best roofing solution depends on the condition and design of the existing roof, which is why evaluating the problem first is so important.
Dealing with a difficult roof section or persistent leak? Reach out to Integrity Roofing & Construction to explore your options.
Ever wondered what goes underneath your roofing shingles?
Starter shingles serve an important purpose. They provide an additional layer of protection along the roof’s edges while also creating the proper starting point for the rest of the shingles. They help our crew establish the correct alignment and installation pattern as the roofing system goes up.
It may look like a small detail, but roofing is made up of many components that work together to protect your home.
Our project manager breaks down starter shingles from a job site in Bainbridge Island so you can see exactly what they do and why they matter.
Want to learn more about what goes into a properly installed roof? Give Integrity Roofing & Construction a call.
Your roof needs to breathe IN and OUT.
Our estimator shows an example of a roof with soffit venting, which provides intake ventilation and allows fresh air to enter the attic.
But there’s a problem: this section of the roof terminates at a roof-to-wall transition, leaving the air without a proper exhaust path.
That means you can have good intake ventilation but still have an incomplete ventilation system if there’s nowhere for that air to escape.
Proper attic ventilation is about creating a continuous airflow path. You need to be sure to have a complete ventilation system! Curious if your roof has this? Our estimators can take a look.
Your shingles are supposed to stay put. So what happens when they start coming loose?
On this roof, the top layer of shingles is no longer holding securely. When shingles lose their adhesion, they can lift, move, and become more vulnerable to wind and weather.
This can be especially concerning on roofs with multiple layers, where the top layer may not be properly bonded to the roof below. Once that layer starts letting go, the roof loses some of the protection it was designed to provide.
Loose or lifted shingles are a warning sign worth paying attention to. They may indicate that your roof is reaching the end of its life.
Not sure if your shingles are still holding strong? Have your roof inspected before the next storm puts them to the test.
On this home, our team found both older and newer sections of roofing. The leak was coming from the older section, and you can see why by looking closely at the shingles.
Significant granule loss and exposed fiberglass are clear signs that the shingles have experienced substantial wear. Granules help protect the shingles from UV rays and weather exposure, so when they’re gone, the roof becomes more vulnerable to deterioration.
This is why looking at the condition of the shingles can provide important clues when tracking down a leak.
If your roof has multiple sections or has been repaired or added onto over the years, it’s worth knowing which areas are aging and how they’re performing.
Think your roof may have an older section hiding a problem? Have it inspected before a small issue turns into a bigger one.
We found another layer under these shingles…
When a second layer of shingles is installed over an existing roof, the top layer may not adhere as well as it should. Heat can make this issue even more noticeable as shingles expand, contract, and move over time.
On this roof, our estimator found nails that had completely pulled out, leaving the shingles above with little to hold.
It’s a good reminder that what you see on top of your roof doesn’t always tell the whole story. Multiple layers can hide what’s happening underneath, which is why inspecting the existing roof system is an important part of planning a replacement.
Do you know how many layers are on your roof?
A roof cricket is a raised, pitched structure installed behind a chimney to prevent water from sitting on the backpan.
In this case, the cricket creates a pitched roof with two valleys that guide water around the chimney. From there, the water is directed toward the diverter and kicked off the roof instead of collecting in one spot.
This kind of drainage detail is especially important because standing water and debris can lead to deterioration over time.
A roof isn’t just about the shingles you see. The way every part of the system handles water matters.
If you have an area on your roof where water seems to sit instead of drain, it’s definitely worth having it inspected.
