There are many components that go into a new roof and the quality of those products contribute to the overall performance that you will get out of your roof. In the Pacific Northwest, waterproofing is essential to any project when it comes to residential roofing and commercial roofing. For this reason, one of the most important aspects of any roofing system is the underlayment.

Underlayments are installed between the roof deck and the shingle to waterproof the deck during installation, safety to staff and airflow of a roof.

Roofing in the rain underlaymnets

The underlayment also acts as an important second line of defense from leaks and ice dams. Traditional underlayment is commonly referred to as felt or tar paper, and is made of paper saturated in asphalt.

We apply synthetic underlayment, manufactured using a three layer construction that won’t tear, or dry out and become brittle like traditional tar paper or leak even when soaking wet. It can withstand the desert heat (traditional felt is black while many synthetic underlayments are gray, attracting less sunlight), pouring rains, high winds, ice and snow.

We also use ice & water shield, which is a thick rubberized asphalt membrane that goes beneath the shingles of your roof and can protect your home from water leaks caused by ice dams and wind-driven rain. It’s installed around skylights, chimneys, plumbing, heat vents, and ventilation caps – anything that penetrates the roof deck.

  • An ice dam is a ridge of ice that forms at the edge of a roof and prevents melting snow (water) from draining off the roof. The water that backs up behind the dam can leak into a home and cause damage to walls, ceilings, insulation, and other areas.

Because the synthetic underlayment protects the roof from penetrating moisture by shedding water away from the roof deck, this allows our roofers to install shingles on new roofs in the rain while also preventing mold and wood rot. Another feature of synthetic underlayment is that it’s slip-resistant, even when wet, which clearly helps roofers in the Northwest. In addition, it doesn’t curl due to moisture.

Roofing in the rain

Repairing brickwork that’s damaged, cracked or crumbling will allow a chimney to maintain waterproof and counter flashing performed by a roofing company to work. The mortar joints are incredibly important, as they help support the entire structure. When mortar joints become impacted by damage it is very easy for water and other elements to seep in. Eventually, these exposures lead to the destruction of any masonry structure. In order to prevent further damage, repointing is conducted to reseal mortar joints.


You start by using a mechanical angle grinder to remove the damaged mortar between joints and remove remaining damaged materials. This process must be carefully conducted, to maintain alignment of nearby bricks. Once all of the damaged portions are removed, the joints must be cleaned out and swept free of debris so that the newly mixed mortar can be applied. This new mortar fills in the joints where the damaged mortar has been removed, granting brand new durability and aesthetic appeal to your brick structure (or likely chimney for most homeowners).

When properly done, repointing restores the visual and physical integrity of the masonry. Improperly done, repointing not only detracts from the appearance of the building, but may, in fact, cause physical damage to the masonry units themselves. A good repointing job is meant to last, often in the range of 50-100 years.